Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

error of simulation in cst.

Status
Not open for further replies.
R

razavipour

Junior Member level 1
Junior Member level 1
Joined
Aug 12, 2007
Messages
15
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,283
Activity points
1,375
hi my friends.
in my project in CST MWS5 this error appears:
--------------------------------------------------------------
port number1 is filled completely with metal.
maybe the background material is defined as PEC?
--------------------------------------------------------------
my port is not filled with metal.
I want to work with PEC background.
what should I do?
thank you very much for your cooperation.
 

Hello razavipour,

In my opinion, although your port is not filled with PEC it is probably touching an Electric Boundary. Try to create a small gap between the port and the adjacent boundary. To do that, go to the Background Material dialog box and add space in the suitable direction.

Good luck,
P.
 

    R

    razavipour

    Points: 2
    Helpful Answer Positive Rating
Hie Razaviour

Sometimes it also occcurs if the port is not porperly defined otherwise as stated by pushhead.

Upload ur model if possible
 

    R

    razavipour

    Points: 2
    Helpful Answer Positive Rating
hi,

you could try increasing the Mesh Line Ratio. Typically it's set to 10.0. Try increasing it gradually (10 20 30 ...) and see. You can access it from the "Global Mesh Properties" button. It might work
 

hello all,

I also having problem while doing simulation,
error display: Port 1 is homogeneously filled within 3mesh

may I know how to overcome this prob?
 

hi,

you could try increasing the Mesh Line Ratio. Typically it's set to 10.0. Try increasing it gradually (10 20 30 ...) and see. You can access it from the "Global Mesh Properties" button. It worked for me
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top