Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

low voltage reference

Status
Not open for further replies.
leg1234

leg1234

Member level 2
Member level 2
Joined
Dec 4, 2006
Messages
46
Helped
11
Reputation
22
Reaction score
3
Trophy points
1,288
Activity points
1,583
Hi, all

I am interested in the low voltage reference voltage generation, such as below 0.5V.
Does anyone knows a way to do that? Any reference material is appreciate.
 

Hongchin Lin, Wu-Chang Chang and Yen-Tai Lin "AN AREA-EFFICIENT CMOS BAND-GAP REFERENCE CIRCUIT FOR LOW SUPPLY VOLTAGES"
 

    leg1234

    leg1234

    Points: 2
    Helpful Answer Positive Rating
Hi,
This paper by chatterjee will help you.
 

    leg1234

    leg1234

    Points: 2
    Helpful Answer Positive Rating
Hi
I also need some references on low voltage biasing
 

very good papers, thanks a lot！
 

If they really helped, please push the botton "helped" .
 

This paper is very helpful

Added after 7 minutes:

thanks again

Added after 5 minutes:

maxim low voltage ref product
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top