Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to place PORT in eagle schematic (like in altium) ?

Status
Not open for further replies.

euclectus

Newbie level 2
Newbie level 2
Joined
Sep 19, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,290
eagle port lib

Hey, would someone know how to place PORT in eagle (like in altium, see the red ellipsis on the screenshot).

Thanks !
 

join 2 nets eagle schematic

In eagle if you just name the nets.
Click on the resistor icon with R2 highlighted (and then the wire/net) and give your net a name. If you give subsequent nets the same name you will be prompted to join the nets.
To display the names of the nets on your schematic click on the label icon (picture of a net with ABC above it) and then on the net you want to display the name of. The frames library has ports of varying size you can use for neatness.
 
schematic eagle frame

Old Nick said:
In eagle if you just name the nets.
Click on the resistor icon with R2 highlighted (and then the wire/net) and give your net a name. If you give subsequent nets the same name you will be prompted to join the nets.
To display the names of the nets on your schematic click on the label icon (picture of a net with ABC above it) and then on the net you want to display the name of. The frames library has ports of varying size you can use for neatness.

PERFECT ! Damned Frames library i didn't know about it ! Fabulous ! THX !
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top