Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

when design Bandgap, what kind of simulation should be done?

Status
Not open for further replies.
G

gavin168

Junior Member level 3
Junior Member level 3
Joined
Feb 8, 2007
Messages
26
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,449
bandgap pm simulation

Hi, Every guy

I am fresh designer, with less experience.

From here, I saw some topics about Bandgap design. here, it is said the PM and step responce simulation should be finished to get satability.

I am still not sure what simulation should be include when designing Bandgap and how to do.

Regards,
 

psrr simulation

Basically, you do temperature analysis. so that u can veify whether you are getting the correct reference voltage across temperature variation with specified correction
 

design bandgap

Also the PSRR simulation is needed.
 

temperature sweep in spectre

1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.
 

    G

    gavin168

    Points: 2
    Helpful Answer Positive Rating
line regulation simulation

ambreesh said:
1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.
Click to expand...

it's a great answer, and beyond that, I think that you can use .stb analysis to see whether your bandgap design is stable.

and what's the meaning of "Line regulation" for your 6th term? thx!

BR!
 

bandgap ac analysis

ambreesh said:
1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.
Click to expand...

Hi,ambreesh. About item 3 how to make sure negative feedback is more than the positive feedback?
 

bandgap ac simulation

thank you everyone.

And i am also not sure how to do AC analysis on the loop. could you explain more detail. thanks

Regards
 

ac
dc(voltage temp.)
tran
 

Line regulation means, for which input voltage range variation, the output is stable dc output value.
 

Re: when design Bandgap, what kind of simulation should be d

gavin168 said:
thank you everyone.

And i am also not sure how to do AC analysis on the loop. could you explain more detail. thanks

Regards
Click to expand...

Refer to
 

Re: when design Bandgap, what kind of simulation should be d

what does ".stb analysis " means?:?:
 

Re: when design Bandgap, what kind of simulation should be d

EricSun said:
what does ".stb analysis " means?:?:
Click to expand...

cadence's spectre stability analysis
 

Re: when design Bandgap, what kind of simulation should be d

gavin168 said:
Hi, Every guy

I am fresh designer, with less experience.

From here, I saw some topics about Bandgap design. here, it is said the PM and step responce simulation should be finished to get satability.

I am still not sure what simulation should be include when designing Bandgap and how to do.

Regards,
Click to expand...


Ac, tran analisys should be done.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top