Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Electric Mosquito Killer circuit

Status
Not open for further replies.

dmmahesh

Junior Member level 2
Junior Member level 2
Joined
Sep 13, 2007
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,449
mosquito killer circuit

:D How does Electric Mosquito Killer bat work, and send us the circuit as well as the part spec...:idea:
 

electronic mosquito killer circuit

it just uses high voltage through the adjacent wires... if i remem well, inductors are used for generating them using inductive kickback that is why it isnt that harmful to us....
 
electric mosquito killer circuit

I uses just a push-pull inverter with a transformer, switched at around 2KHz.
 

mosquito killer bat circuit

k... this is the basic idea that i was talkin about.... we use a square wave generator which at its output has a diode and inductor connected in series.... when the output of the square wave generator goes low the inductor shows kickback and the diode protects the square wave generator by going to reverse bias... the square wave and the inductor determine the working voltage....
 
  • Like
Reactions: joffy

    joffy

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top