Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How does current flow in an antenna if it is opencircuited at the ends?

Status
Not open for further replies.

mvenkat3272

Newbie level 5
Newbie level 5
Joined
Aug 11, 2006
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,331
How does current flow in an antenna if it is opencircuited at the ends?
 

Re: Antenna

as you know in a transmission line the current flows equal and opp because of the interaction between the two lines... when you open circuit such a line then current has to flow through it any how since the current flow is only due to the interaction between the lines.... and when you make a dipole antenna out of it even though there is no interaction between the lines and the ends where they are bent in opposite directions...then current still flows because there has to a same current as there is interaction throughout the rest of the line...hence a current has to flow if it has to satisfy kirchoff's law...
 
Re: Antenna

An open circuit is an infinite resistance. That is the same that an infinite impedance at 0Hz.

In an antenna, you hate to think in frequency. At high frequency, an open circuit is not an infinite impedance.

For example, a capacitor is an open circuit, that represents an infinite impedance at 0Hz, but at high frequency it behaves as a non infinite impedance. It's the same for antennas.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top