Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using XF function in Spectre to measure the PSRR of an amplifier

Status
Not open for further replies.
S

surianova

Advanced Member level 1
Advanced Member level 1
Joined
Sep 1, 2004
Messages
411
Helped
30
Reputation
60
Reaction score
8
Trophy points
1,298
Location
ASIA
Activity points
3,266
hi all!

i use XF function in spectre to measure the PSRR of a fully differential amplifier. But for positive and negative output node, is it just put diffrential signal like out1 and out2? or choose either out1 or out2 for positive output node and gnd for negative output node?
 

Re: XF

For single port psrr, choose out1 or out2 as pos node and gnd as neg node;
For differential port psrr, choose out1 and out2 as pos and neg node.
 
  • Like
Reactions: feyn

    F

    feyn

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top