Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How does DDC work and how its implement in satellite digital receiver?

Status
Not open for further replies.
N

Nosheen

Member level 1
Member level 1
Joined
Aug 2, 2007
Messages
33
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,557
hi,
i want to know the working of DDC and also its implementation in Satellite digital receiver to low down the micro wave frequencies to IF...
if anybody knows,kindly help me out.

regardz
Nosheen
 

Re: how DDC works???

ddc actually consists of a mixer and numerical controlled oscillator and a phase locked loop. and frequec synthesizer. in this the signal is demodulated in this process.
the incoming signal is taken and it is mixed with the sine and cosine functions with equal frequency of the carrier so from that we obtain the actual message signal.

hope clear
if need more help reply back again

with regards
raj
 

    N

    Nosheen

    Points: 2
    Helpful Answer Positive Rating
Re: how DDC works???

Hello Nosheen,

if you are interested in how a DDC works you could take a look at some device's data-sheet and application notes. In the past I worked on the FW of a board equipped with a DDC by Analog Devices, the AD6624A: its data sheet is not very well organized (in my opinion the information necessary to set the configuration of the device are too fragmented in the document and not clearly described) but it is a good example to study from an architectural point of view, because it describes each functional block of the device.
Then you could read some application note to see how the device could be used in a TLC system.

Regards
Mowgli
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top