Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

antenna array on 60GHz

Status
Not open for further replies.
J

jayleung

Member level 5
Member level 5
Joined
Nov 29, 2005
Messages
82
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,962
60 ghz antenna

Hi, everyone. Has anyone designed the 60GHz antenna array before? I have some questions about it:

1) which types of the antenna will be suitable for such a high frequency, microstrip patch antenna, slot antenna, printed dipole antenna or something else?

2) which fabrication techniques should be used, PCB, Ceramic, or silicon microelectronics? What are their pros and cons.

Thanks.
 

dipole antenna 60ghz

Hi
I think Patch antenna array is useful.
See the paper on link below .

This will help you to understand.
Abhishekabs
 

    J

    jayleung

    Points: 2
    Helpful Answer Positive Rating
60 ghz patch antenna + pcb

But I cannot open this link. What is the name of this paper? Thank you very much!

Added after 1 minutes:

And any other materials about such array available?
 

i think patch antennas aren't useful in this case since their losses increas as you increase frequncy, i think reflector antennas are suitable
collin antenna book is helpful
regards
 

i also think patch would be best for it.

azam
 
  • Like
Reactions: kutyba

    K

    kutyba

    Points: 2
    Helpful Answer Positive Rating
jayleung said:
Hi, everyone. Has anyone designed the 60GHz antenna array before? I have some questions about it:

1) which types of the antenna will be suitable for such a high frequency, microstrip patch antenna, slot antenna, printed dipole antenna or something else?

2) which fabrication techniques should be used, PCB, Ceramic, or silicon microelectronics? What are their pros and cons.

Thanks.
Click to expand...


u can use spiral array.......its use for high frequency
 
  • Like
Reactions: kutyba

    K

    kutyba

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top