Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can improve CMFB GBW?

Status
Not open for further replies.
C

castrader

Member level 1
Member level 1
Joined
Jun 8, 2005
Messages
36
Helped
7
Reputation
14
Reaction score
1
Trophy points
1,288
Activity points
1,468
In my design of 2-stage class AB fully differential OP, ac gbw=25MHz av0=110dB
my cmfb gbw is only 5MHz av0=100dB
I use resistor as cm sensor, and use differential op with diode load as cmfb gain stage, feedback to class AB 1st stage tail current partly.
How to increase CMFB GBW?
 

it's difficult that making the unity-gain freq of the differential-mode and CMFB loop about equal, because the cmfb loop have more poles than DM loop
 

maybe you can try another cmfb, like feedback to the load device of the first stage, maybe it is useful.
 

    C

    castrader

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top