Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Indcution loop vehicle detection

Status
Not open for further replies.
D

dilan2005

Member level 4
Member level 4
Joined
Jul 22, 2007
Messages
75
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,288
Activity points
1,837
vehicle detection build

I need to implement a vehicle detection using Induction loop.
My primary plan is to make a LC oscillator .
when vehicle reach coil then inductance will go high and frequency of the oscillator will change.
then using mircocontroller detect the frequency change and detect the vehicle!

Is this method is ok!!

iF any one had build a Induction loop based vehicle detector,Please share the experience!!!

Guide me!!

Thanks
 

vehicle detection mat

that is a good idea.... the one main problem related to it is the EMI... if you can provide proper EMI sheilding to the inductor then the circuit would be just fine....

because things like starting of a vehicle using kickstart has a very high voltage spike and is wideband and this can send a different frequency signal with high enough voltage to trigger your circuit.... so you would be needing highly narrowbanded filters and good EMI sheilding....
 

    D

    dilan2005

    Points: 2
    Helpful Answer Positive Rating
vehicle detection loop how to do

More reliable results, as far as detecting vehicles is concerned, can be achieved with fixed-frequency generator and the vehicle detection coil working as part of LC parallel filter .. see attached picture ..

Regards,
IanP
 

    D

    dilan2005

    Points: 2
    Helpful Answer Positive Rating
vehicle detection circuit

I want know more about coil , can have just about 1foot diameter coil instead of 6 foot one in this detection system.:idea:
As i designing mobile system better to have a smaller one like a mat where u can put it on the road
 

dilan2005 said:
I want know more about coil , can have just about 1foot diameter coil instead of 6 foot one in this detection system.:idea:
As i designing mobile system better to have a smaller one like a mat where u can put it on the road
Click to expand...

That Circuit is from My Website.
**broken link removed**

Yes you can make a One Foot Coil, But it will Require More Turns of wire to get a reasonable inductance value.

And Where Ever you Place it is OK, But you need to Adjust the Circuit for Each Location for best detection.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top