Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS to ADS design Export: Help Plz

Status
Not open for further replies.
A

Asim Ali Khan

Junior Member level 3
Junior Member level 3
Joined
Dec 12, 2005
Messages
25
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,471
hfss gdsii export

Hi all,
I need to export my design from HFSS to ADS. Can any one help me with this.
Thx in advance

Asim
 

Hello Asim,


If you want to export Ansoft HFSS design to Agilent ADS then
1. Simulated design use export S-parameters (in touchstone format) then import for ckt simulation in ADS
2. Layout Design export in DXF or IGES/GDSII then import & use the Momentum for EM simulation...

you can use even Ansoft Designer or AWR Microwave Office for the samepurpose...

By the way why you want to export?
---manju--
 
Thx I will try wht u hv told me. Actually i need a gerber file for my design.
Thx again
 

to export gerber file from an HFSS file decribing a multi-layered structure (say 6 metal layers)
you need to define 6 offset coordinates, whose origin lie on eatch of the 6 layers. Then you export them one by one to gerber format.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top