Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Directivity for the patch

Status
Not open for further replies.
C

cuongtran

Full Member level 3
Full Member level 3
Joined
Feb 6, 2007
Messages
184
Helped
16
Reputation
32
Reaction score
9
Trophy points
1,298
Location
WhiteHouse
Activity points
2,110
Hi everybody,

I fabricated an antenna patch on the surface HIS, but now my antenne have two principal lopes , the gain is not so good, So anybody has the solution for me for augmenting the gain and for radiating only one lope's principal? pls help.
I will appreciate all the help.

Just a look ex..
 

We need some more information, what model were using to design and the substrate properties including its thickness. I have designed patch antennas and the patterns are quite okay.
 

    C

    cuongtran

    Points: 2
    Helpful Answer Positive Rating
if there are two principle lobes, that means it is higher mode not the doninant mode.
 

    C

    cuongtran

    Points: 2
    Helpful Answer Positive Rating
Thank you,
Hi manenef

Added after 2 minutes:

Hi, I used HFSS and my substrat had eps of 4, the patch is not just on the surface, it is higher some mm, is it the probleme?

Thanks,
Hi mane, would u mind to post your file here plz?
 

try to reduce the patch dimension to avoid the higher mode
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top