Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can I increase the swing of a unity gain amplifier?

Status
Not open for further replies.
A

ahmed709

Junior Member level 1
Junior Member level 1
Joined
Dec 22, 2006
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,425
How can i increase the swing of the unity gain amplifier, i tried to increase and decrease the (W/L) of the transistor but the swing is not very good.

thanks in advance
 

Re: Unity gain amplifier

have u checked its delay times
i.e.

its risetime and falltime

time period
check these things also
 

    A

    ahmed709

    Points: 2
    Helpful Answer Positive Rating
Re: Unity gain amplifier

try increasing the biasing current... it would help.....
 

    A

    ahmed709

    Points: 2
    Helpful Answer Positive Rating
Re: Unity gain amplifier

Could be your opamp is limited by the input common mode range. Try to increase the slew rate of your opamp, that is by increasing the biasing current, which will help in fasten the rise and fall times.
 

    A

    ahmed709

    Points: 2
    Helpful Answer Positive Rating
Unity gain amplifier

Increase the tail current of the differential pair can increase the slew rate. But you have to check the phase margin.
 

    A

    ahmed709

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top