Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to decide the width of core ring and power stripes?

Status
Not open for further replies.
S

santhoshonkar

Newbie level 3
Newbie level 3
Joined
Jul 3, 2007
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
Hi there,
Ametuer student here
can some one help me out in finding answers to the following questions:

-How to decide the width of core ring?
-How to decide on the width of power stripes?
 

Power Planning

that widths are provided in the project ...as an constraints... if you are doing just only practice on any tool then you can give by default value that will be given in the manual....
 

Re: Power Planning

The widths of the power mesh and ring is decided based on the total expected power consumption by the design. It also depends on the metal layer to be used for the power mesh and ring ( current limit on the metal layer).
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top