Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why there is static power dissipation in CMOS ICs due to sub-threshold conduction?

Status
Not open for further replies.

lordsathish

Full Member level 5
Full Member level 5
Joined
Feb 11, 2006
Messages
246
Helped
33
Reputation
66
Reaction score
3
Trophy points
1,298
Location
Asia
Activity points
2,698
Hi... could any one tell me... why there is static power dissipation in CMOS IC's due to sub-threshold conduction....
 

static power

static power is camparing with dynamic power which is normally the digital clock switch power.
Static power is the power when the digital circuit is power down. Because of the sub-threshold conduction, there is current following through VDD to GND. That's the static power
 

Re: static power

Hi could you tell me what is sub-threshold conduction...
 

static power

When the Vgs of the transistor is smaller than the threshol voltage, the current Ids is not zero, that's the sub-threshold conduction
 

    lordsathish

    Points: 2
    Helpful Answer Positive Rating
static power

**broken link removed**

that's may helpful
 

Re: static power

Power consumed when the output or input are not changing or rather when clock is turned off. Normally static power dissipation is caused by leakage current. (As we reduce the transistor size, i.e. below 90nm, leakage current could be as high as 40% of total power dissipation).

Check this link too

**broken link removed**
 

static power

Remember one thing, in small geometries, the treshold voltage isn't decrease so much as suppl voltage, therefore the static power dissipation increases, because the gates could be made high impedance like in techologies with larger suppl voltages. quiesent currents in gates in power dowb node could be in A range for large digital chips an low voltage and small geometries.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top