Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to draw a nice intersection view for CMOS transistor ?

Status
Not open for further replies.

coolradar

Newbie level 4
Newbie level 4
Joined
Jan 31, 2006
Messages
6
Helped
4
Reputation
6
Reaction score
3
Trophy points
1,283
Activity points
1,325
I need to draw a intersection view for several CMOS based transistor. I just wondering that is there any software can do this job nicely.

Thanks
 

Please clarify what do you mean by intersecting transistors.
 

Re: how to draw a nice intersection view for CMOS transistor

sorry for the misunderstanding.

When you do layout, you usually do it in top view, where you have active regions on both sides and poly gate at the middle.

I want to draw a 3-D view of CMOS transistor, which means there is a substrate on the bottom, metal and gate stack on the top.

I just want to know is there any specific software can do this job.

Thanks, Fahmy
 

Re: how to draw a nice intersection view for CMOS transistor

Look these posts, it may help you
 

    coolradar

    Points: 2
    Helpful Answer Positive Rating
I remember that Microwind layout editor was able to do it . check this link.
**broken link removed**
 

    coolradar

    Points: 2
    Helpful Answer Positive Rating
Re: how to draw a nice intersection view for CMOS transistor

this is good tool for drawing layout . there are also alot of example
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top