Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A Better Model For Proteus 74HC595 And 74HC164

Status
Not open for further replies.
Fragrance

Fragrance

Advanced Member level 4
Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,190
Helped
248
Reputation
496
Reaction score
202
Trophy points
1,343
Location
East Of Earth
Activity points
8,933
proteus 74hc595

HI

Here is the better model of 74HC595 for proteus test stuff and lib for model included in upload, I hate IEC types chip these consume more space in design, I also designing 74HC164 simple model, hope friend will like this model
 

74hc164

hi

here is the 74HC164 model both model are lisa model so no df file required to run them
 
proteus 74hc595

thanyou very much!
I need it !
 

74hc595

can any bedy tell me difference 74ls164 and 74hc164

can i use 74hc164 instead of 74hc164 with same code
 

    V

    Points: 2
    Helpful Answer Positive Rating
lisa model file proteus

NeoMatrix said:
can any bedy tell me difference 74ls164 and 74hc164

can i use 74hc164 instead of 74hc164 with same code
Click to expand...

74ls164 mean low power shotkcy ttl chip and 74hc164 mean high speed cmos chip you can used same code for bothy chips

regards
Fragrance
 
  • Like
Reactions: AliRazoR

    A

    AliRazoR

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
74hc595 proteus

hello frangance


thanks for the reply i just build the 6 of 5x7 led matrix board with pic16f877a using 74hc164 for cols and for rows giving direcly from the portb

can u give me some suggestion so that i can make led moving message as i am writing this code in mikroc www.mikroe.com coz ccs c compiler has so much limitations for free

this the schematic and the code in the pdf file
i not understand from how its driving to the rows
can u pls tell me about this for me
i be appreciate

thanks regards
 

cmos model for proteus

Thanks too much
this are a very good models
but sorry i have two questions for you
1- Have any other libarray to upload all togetger her
2- how can i creat a libarray model for som devices to proteuse

thanks too much again
 
  • Like
Reactions: Nayyar

    N

    Nayyar

    Points: 2
    Helpful Answer Positive Rating
proteus 74hc164 matrix de leds

Fragrance said:
hi

here is the 74HC164 model both model are lisa model so no df file required to run them
Click to expand...
Hi!
Do you have the kindness to put a schematic for one 74hc165 with bcd paralell input driving an 74hc164 serial input paralell 7 seg output in proteus simulation?

I tried but i can`t, start with 8 and then go extinguish one by one the segments
Thankfully for your help
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top