Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

difference between gsm 900 and gsm 1800

Status
Not open for further replies.

sorang363

Newbie level 3
Newbie level 3
Joined
Jun 4, 2007
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,306
I would like to know the major differences between gsm 900 and gsm 1800 which determines the design parameters for both the networks?[/b]
 

Dear sorang363

The main difference between GSM900 and GSM 1800 is the band because each one has different band as follows:
GSM900: 890MHz---->915MHz uplink 935MHz----->960MHz downlink
GSM1800: 1710MHz---->1785MHz uplink 1805MHz------>1880MHz downlink

So, each one has differnet band noting that GSM1800 has bandwidth that is three times more than GSM900(75MHz for GSM1800 while 25MHZ for GSM900)
 
Major difference is from Operator´s point of view because as you move from low frequency you can accommodate more and more users and can offer higher data rates as well..

Cell size is lower as compared to GSM at same transmit power.

Regards,
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top