Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to measure radiation of microstrip within ADS momentum?

Status
Not open for further replies.
MrElec

MrElec

Advanced Member level 4
Full Member level 1
Joined
Oct 10, 2005
Messages
111
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,298
Location
Tunisia
Activity points
2,075
Radiation

Hello guys;

I have to realize a Microstrip to measure his radiation, and i want to load one of its port with an impedance of 50Ω?
what can i do this in practice and within ADS momentum?

thanks.
 

Re: Radiation

you must select port» port for edge group.
 

    MrElec

    MrElec

    Points: 2
    Helpful Answer Positive Rating
Radiation

simply add port it is by default 50ohm, so it acts like a 50ohm termination, or make your question clear
 

    MrElec

    MrElec

    Points: 2
    Helpful Answer Positive Rating
Re: Radiation

Hi,

ADS has provide a huge documentation and example regarding Momentum. You should read their example to explore the design environment.


Goodluck...
 

    MrElec

    MrElec

    Points: 2
    Helpful Answer Positive Rating
Re: Radiation

Thanks for your helpful remarks, i've found the solution.

We have to do the Electromagnetic simulation of the Microstrip with 2 ports set to 50Ω then in Momentum>>Radiation Pattern we will find the 2 excitation ports, set one of them to 0V and to 50Ω that's all the folk.Now go to visualisation and we get our radiation pattern on 3D or 2D cut.

Ciao....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top