rajsrikanth
Full Member level 2
can any one help me to write code for NCO (numerical control oscillator in verilog.
if anyone have the code pls can u send me.
thanx
if anyone have the code pls can u send me.
thanx
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
module top (clk, out);
input clk;
output reg [31:0] out = 0; // assumes Verilog 2001
always @ (posedge clk)
out <= out + 170000 * 64'h100000000 / 50000000; // 170 kHz output, 50 MHz clock
endmodule