Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Create Electronic message display using RGB LED

Status
Not open for further replies.
F

fazan83

Advanced Member level 4
Full Member level 1
Joined
May 11, 2006
Messages
115
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Location
Gurun, Kedah, Malaysia
Activity points
2,012
cpld led matrix

Hi all,
I'm new in this field, anybody have some resource on how to create an electronic message display system using RGB LED and send the message through hyperterminal?

I want to know how to program the FPGA to receive the message and decode it to the Row and Collum of the RGB LED display module to display the message.

Anybody have input on this please advise.

Thanks.
 

cpld with led matrix

Hi

I played around with a DBMAXLED CPLD board from Altera (5x5 RGB LED matrix). Altough i canned the project I was able to send a 5x5 pixel block from a bitmap on my PC to the CPLD LED matrix. It worked quite well; you load any bmp into the app and then just drag the mouse over the bmp to send that part to the matrix.

Let me know if you would like more info
 

led matrix 5x5

hdv said:
Hi

I played around with a DBMAXLED CPLD board from @ltera (5x5 RGB LED matrix). Altough i canned the project I was able to send a 5x5 pixel block from a bitmap on my PC to the CPLD LED matrix. It worked quite well; you load any bmp into the app and then just drag the mouse over the bmp to send that part to the matrix.

Let me know if you would like more info
Click to expand...

Sure can you please give more info on this...
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top