Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set sweep time of speatrum analyzer?

Status
Not open for further replies.
J

John_li

Full Member level 5
Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,945
Hi all,
How to set sweep time of speatrum analyzer to get the correct result?If set the time too fast,get lower power.I get a n equation:BW^2/K,BW----RBW,andi do not know K=?,and why?
Thanks,
 

Spectrum analyzers usually have an "auto sweep time" mode where it automatically selects the proper sweep time depending on your specified resolution bandwidth and video bandwidth.

K depends on the characteristics of the particular filter used in the instrument. Here's a quote from Agilent Application Note 150, "Spectrum Analysis Basics:
"The value of k is in the 2 to 3 range for the synchronously-tuned, near-Gaussian filters used in many Agilent analyzers."

Here is the entire app note, 5952-0292EN.pdf, about 8.5 megabytes:
http://www.home.agilent.com/agilent...c=US&nfr=&ckey=459602&cname=AGILENT_EDITORIAL
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top