Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DIY regulated power source

Status
Not open for further replies.

Electro-Squirrel

Newbie level 3
Newbie level 3
Joined
Apr 19, 2007
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Toronto
Activity points
1,314
Hi,
Does anyone have the circuit diagram or know of a kit for a 3.0-4.5V regulated power supply, power source is 3 AA batteries ideally?

Thanks in advance for any help.
 

What is the current requirement? Take a look at www.linear.com. They make a number of boost converter ICs. For example, LTC3401 can handle up to 1A and is adjustable with two resistors. The datasheet has several typical circuit diagrams. (Note: 1A is the chip maximum, you will never get this much from AA batteries. Since battery current is always greater than load current in boost regulators.)
 
Electro-Squirrel said:
Hi,
Does anyone have the circuit diagram or know of a kit for a 3.0-4.5V regulated power supply, power source is 3 AA batteries ideally?

Thanks in advance for any help.

The input voltage has to be must greater than the regulated output voltage.
Can't you go 4 AAA instead?
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top