Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

layout tricks in standard cells

Status
Not open for further replies.
D

drabos

Full Member level 6
Full Member level 6
Joined
Jan 3, 2006
Messages
397
Helped
45
Reputation
90
Reaction score
15
Trophy points
1,298
Activity points
3,769
I am just wondering why in many standard cell library in an inverter layout the gate is not straight rather like a snake. What is the advantage of this structure???
 

In technologies with silicide use of snake shaped gates allows to save the area due to reduction of the areas of a source and a drain and accordingly to reduce parasitic cap.
 

    D

    drabos

    Points: 2
    Helpful Answer Positive Rating
I think they do so to be able to compact the area as much as possible without violating the layout design rules
 

    D

    drabos

    Points: 2
    Helpful Answer Positive Rating
Hi all
How does this snake look like?
 

the reason why they use an angle polysilicon layer..to save area but this is allowed only to a short as possible poly bent to minimise the risk of current leakage.
 

    D

    drabos

    Points: 2
    Helpful Answer Positive Rating
FT...I was wondering why an inverter use snake-like gate...Did drabos talk about an inverter or a poly resistor?The latter case is common,I just cannot image a snake-like-gate inverter...
 

inverter

yeah, I can't imagine why, too.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top