Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

physical design algorithms

Status
Not open for further replies.
S

shiv_emf

Advanced Member level 2
Advanced Member level 2
Joined
Aug 31, 2005
Messages
605
Helped
22
Reputation
44
Reaction score
6
Trophy points
1,298
Activity points
4,106
Hi friends

Is it necessary to learn different algorithms for physical design (P & R) ??

I am using SOC encounter 5.2 !! to efficiently perform placement and routing of design ...is it recommended to learn algorithms?/

how does learning algorithms help in working on tools?

Thank you
Shiv
 

i dont think it is necessory for you to study algorithms on placing and routing,
if you really want to do
there are lots of papers and books
for example:
Parallel Algorithms for VLSI Computer-Aided Design Applications. Englewood Cliffs, NJ: Prentice-Hall, 699 p. ISBN 0130158356. TK7874.75.B36
Combinatorial Algorithms for Integrated Circuit Layout. Chichester, England: Wiley. ISBN 0-471-9283Sherwani, N. A. 1993. Algorithms for VLSI Physical Design Automation. 2nd ed. Norwell, MA: Kluwer, 538 p. ISBN 0-7923-9294-9. TK874.S455
8-0. TK7874.L36
of course you can also reference the papers on ICCAD
 

    S

    shiv_emf

    Points: 2
    Helpful Answer Positive Rating
no......if one want to do so........one can be a CAD engineer
 

    S

    shiv_emf

    Points: 2
    Helpful Answer Positive Rating
Just do your work according to the manual of SE!
 

    S

    shiv_emf

    Points: 2
    Helpful Answer Positive Rating
hi
As far as iam concerned,learning algorithms gives some idea of optimism.bye
 

    S

    shiv_emf

    Points: 2
    Helpful Answer Positive Rating
can anyone upload a paper on placement optimization....
n i'm facing many probs ...145 hold violations.. post CTS optimization is also nt helping me out..
what shud i do ?
Shiv
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top