Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what is difference between XG and DB mode of DFT tool

Status
Not open for further replies.

quan228228

Full Member level 4
Full Member level 4
Joined
Mar 23, 2006
Messages
196
Helped
16
Reputation
32
Reaction score
3
Trophy points
1,298
Activity points
2,571
The DFT tool of synopsys has two mode, XG and DB mode.
what is the difference?


Thanks!

David
 

Hi,

there is no much diffrence in terms of results but in terms of the time for the compilation there is huge diffrence.XG mode will take very less time compared to the DB mode.

regards,
ramesh.s
 

    quan228228

    Points: 2
    Helpful Answer Positive Rating
Thanks:D

Added after 1 minutes:

Could you tell me more detailed infor. e.g. what is XG mode, what is DB mode?

Thank you very much!

David
 

Hi David,

If u want any other information related to the DB mode u can search in the solvnet there synopsys explained u much what are the diffrent advanges u will get from DB mode and what are the chages in the DB mode.

regrads,
ramesh.s
 

XG is the new mode that handles memory and design differently and is generally faster than DB mode.

Many commands, especially the DFT command also have different syntax, so the migration is not totally straight forwards. Thankfully SNPS gives a tool that translates scripts from one mode to the other.

I suggest you write anything new in the XG mode as after the current release the DB mode will become obsolete and unsupported
 

    quan228228

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top