Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
actually, the results of simulation using lumped port and wave port have small differences. That means both can be applied for ML, provided that single mode propagation is considered.
choosing waveport or lumped port for any design is really a little complex problem. anyway my opinion is whenever ur design is with in some boundary then u shall choose lumped ports for the same and if the design is external to any boundary then u shall choose waveports. this is what hfss specifies. anyway choosing waveport or lumped port doesnt matters a lot, it causes very small difference at last.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
