Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the convergence command in Spectre?

Status
Not open for further replies.

hellotxn

Member level 4
Member level 4
Joined
Dec 11, 2003
Messages
79
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
575
convergence in spectre

When the circuit is not converged in spice or ADS, the nodeset command could be used to help to solve the problem. I want to know whether there is a similiar commnd in spectra. Thanks in advance!
 

convergence in spectre

in the spectra simulation window, you can find Simulation>convergence aids>node set
 

    hellotxn

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top