Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CST MWS 2006 Horn Antenna Help Required (Basics)

Status
Not open for further replies.

sameer1122

Newbie level 5
Newbie level 5
Joined
Feb 16, 2007
Messages
10
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,283
Visit site
Activity points
1,334
cst horn

Hi
I am just trying to learn CST MWS 2006. I have modelled a horn antenna which is already realised. The antenna resonates at 15GHz.

I have assigned a waveguideport to the antenna. But I am finding almost entire signal being reflected. I request you to kindly try to locate the problem. I feel I have not assigned the port properly
 

Hi!

I solved the strcture without any changes with 2006 and 2006B. Works just fine -... RL < -25 dB.

Strange!

F.
 

    sameer1122

    Points: 2
    Helpful Answer Positive Rating
RFSimulator said:
Hi!

I solved the strcture without any changes with 2006 and 2006B. Works just fine -... RL < -25 dB.

Strange!

F.


I have tried to repeat the simulation. But I am not able to get the RL of what is mentioned. I have attached the images of the S11 and port signals and also the transient solver settings.

Kindly let me know if I have done correctly
 

Are you simulating between two non-zero frequencies?
try to put the lower frequency 0Hz and keep the upper one
unchanged.

Since someone else got right results, it could mean that
it's how your pc processes the mathematics (memory issues,
type of processor, etc.). Maybe my advice does not help,
but if you have nothing else to do, try this.
Enjoy!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top