Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
If u have software(like CADENCE or HSPICE) u can simulate it in a suitable DC bias but if u want do it in a discrete circuits, ur result will be wrong!
Construct a simple circuit, say a MOS Inverter, on Cadence... Properly design it... Perform the netlist generation for DC operating points... U can find it as the option, Save DC Operating Point in the transient analysis... After netlist n run, select DIrect Plots-> DC Operating point... On the schematic, click on the NMOS or PMOS transistor... The list of specs of the transistor will be displayed... including region of operation, gm, R on, beta, etc...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
