Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

uart to wireless transmission

Status
Not open for further replies.
S

sarathregunath

Newbie level 4
Newbie level 4
Joined
Feb 22, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Trivandrum
Activity points
1,317
hi..
i am facing a problem with wireless transmission of serial data.what i need to do is to interface two PICs.i have to send serial data output at uart of one pic to input of another pic using wireless.how could i do it?
 

now i have not used the wireless interfacing.i have connected them serially using wire.
 

Did u check the UART registers?
e.g UART enable, datarate, stop/parity bits, ..etc....
 
sarathregunath said:
hi..
i am facing a problem with wireless transmission of serial data.what i need to do is to interface two PICs.i have to send serial data output at uart of one pic to input of another pic using wireless.how could i do it?
Click to expand...


At first check that Tx an Rx are properly synchronized to each other or not , you can check it in the wire connection also ....

If it is coming then check that both are properly configured or not .....


may be these are the problems ...
 

sarathregunath said:
hi..
i am facing a problem with wireless transmission of serial data.what i need to do is to interface two PICs.i have to send serial data output at uart of one pic to input of another pic using wireless.how could i do it?
Click to expand...
r u using pic with wireless trancevers
or external rf trancivers
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top