Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS-Wave Port and Lumped port assignment

Status
Not open for further replies.
E

edata

Banned
Newbie level 6
Joined
Feb 16, 2007
Messages
12
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,281
Activity points
0
Hi all,
I couldn't understand how to determine a waveport's or a lumped port's direction.
Can anyone experienced in this tool give me detailed information?
I know it should be from lowest to highest voltage. But don't know the direction of the arrow represents which field? or where to assign it? I'm very confused.

Thanks and best regards..
 

You should define an integration line to specify where the voltage difference is expected to be maximum. This line is used to calculate the port impedance. Apart from this, you should select "Polarize E field" option if you want to align the E-field direction with the integration line direction.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top