Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Solution for PC-PC network with 100m distance

Status
Not open for further replies.
M

manish12

Advanced Member level 3
Advanced Member level 3
Joined
Nov 21, 2006
Messages
983
Helped
66
Reputation
132
Reaction score
33
Trophy points
1,308
Activity points
6,117
is this possible that lan between two pcs which is 100m apart .
using cat5 lan cable directly.
if not then what is the solution
 

network pc-pc 100m

I do belive that it's posible to conect those two pc's to a hub or a switch (wore case scenario the 100m = 50 + 50 meter's betveen the hub and each of the pc) :)
 

Re: network pc-pc 100m

100m is the limit. Try it. It might work, but if not, then you'll have to amplify using a hub (10Mbps) or a switch (100Mbps)
 

Re: network pc-pc 100m

Hi, CAT5 10Mbs is designed for 250meters maximum !. So 100meters is no problem
 
network pc-pc 100m

if the above solutions are a problem in terms of resources you could always go for a better cable like cat6 or cat7. just be sure you get a twisted pair
 

Re: network pc-pc 100m

Hi manish.

The maximum distance that you can get using cat 5 without the use of hubs or switches is 100m

i connected 2 pcs (100 m apart) without using any switches or hubs, and it give me a good result.

Good Luck :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top