Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for materials about USB FS device design

Status
Not open for further replies.
Y

yasser_shoukry

Full Member level 4
Full Member level 4
Joined
May 31, 2006
Messages
233
Helped
25
Reputation
54
Reaction score
5
Trophy points
1,298
Location
Cairo - Egypt
Activity points
2,749
Hi all,
I need a good start to design an USB2.0 Full Speed interface. Can any body help me finding an e-book, articles, sites, HDL codes???

Thanks in advance
 

Re: USB FS device design

HI

1. R U designing this is fpga?
If yes then think abt PHY chip which will be on board.
Many companies provide phy chip

2. To start with design like this. what you have. i mean plateform.

3. Also go through opencore, take help of usb1.1 core,

4. download UTMI spec from net

5. download usb2.0 spec from net

6. download usb in nutshell

7. buy a book if possible- USB system archi by anderson.


Regards.
 
  • Like
Reactions: Kirr

    K

    Kirr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top