Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Firmware and driver for MCU programer

Status
Not open for further replies.
UroBoros

UroBoros

Advanced Member level 2
Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
donkeyprog source code

Hai

I would like to design and build one MCU programer.

Can anybody link me the example sourse code for any programer,like PIC AVR or 8051.

Sourse code for the Windows driver as well as the firmware chip is required .

I want to get a clear idea of how to decode the hex file and manipulate it so as to send it to firmware chip for writing to MCU . I prefer VC++ for driver and for firware any example will do.

with regards

Picstudent
 


    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Hai
Thanks a lot for the PDF .

I am not looking for any programer circuit.

I cant see any firmware and windows sourse in that site.

Actually I am looking for a example on how to decode this hex in PC driver and subsequent processing by the firmware chip on programer hardware. Sourse for the windows driver (in Vb or Vc++ or C#)and for the firmware.

I am not even sure such a thing is available. But if got one I can speed up my study. Hex and exe is available for many circuits ,but no sourse so far..

Hope I am clear

Thanks again

picstudent
 

see:

**broken link removed**
**broken link removed**
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Hai
Thanks.


Does any of this pages contain sourse code for my requirement?

I failed to locate any.

Please

picstudent
 

try this link direct

**broken link removed**
**broken link removed**

there's available firmware and source code and you can modified for experiment

hope help u

tx
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Hai

Thanks for the link.
Now the MCU firmware part is Ok.

Now the software driver,preferabily in VC++.

Thanks again.

picstudent
 

vsmGuy said:
Any progress ?
Click to expand...


little!

**broken link removed**


The programe is having some errors ,but still as a starting point this seems ok.

picstudent
 

Why don't you try the Sprut Brenners ?
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
vsmGuy said:
Why don't you try the Sprut Brenners ?
Click to expand...

What is that?

Is it having sourse code for firmware and windows driver ?


Then only use fopr me

Please clarify.
I think the page is not in english. German ?

picstudent
 

Use world.altavista.com to translate. Everything is available there !!

Let's build it :)
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
vsmGuy said:
Let's build it :)
Click to expand...


As far as I understood,

The site is not having the sourse code for the programer,it only provides the executables which is not what I am looking for.

I was not able to fing the sourse code even with translation.

Correct me if I am wrong.

picstudent
 

I did not look for the source code. Why do you want it ?
 

Hi Picstudent , long time not see you in MSN .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top