Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recommend me a 8052 microcontroller with 4 I/O pins

Status
Not open for further replies.
H

Help

Advanced Member level 2
Advanced Member level 2
Joined
Feb 15, 2005
Messages
617
Helped
7
Reputation
14
Reaction score
3
Trophy points
1,298
Activity points
7,065
Hi,

May i know, there is any least pin and cheap 8052 uC? because i just need 4 I/O.

Anyone can recommend me?

Thank You.
 

Re: Least pin 8052 uC

8-pin versions - 6 general purpose I/Os:

P89LPC901
...
P89LPC908

**broken link removed**

Regards,
IanP
 

    H

    Help

    Points: 2
    Helpful Answer Positive Rating
Re: Least pin 8052 uC

Hi,

Do you have the programmer tool for this chips?

Thank You.
 

Re: Least pin 8052 uC

Info on how to use P89LPCXXX In-Circuit proramming (ICP):

**broken link removed**

Regards,
IanP
 

    H

    Help

    Points: 2
    Helpful Answer Positive Rating
Re: Least pin 8052 uC

AT89C2051 = 20 pin 2K flash memory, 128 byte RAM, 24 MHz xtal, Vcc=2.7-6.0 Volt
AT89C4051 = 20 pin 4K flash memory, 128 byte RAM, 24 MHz xtal, Vcc=2.7-6.0 Volt

AT89S2051 = 20 pin 2K flash memory, 256 byte RAM, 24 MHz xtal, Vcc=2 .7-5.5 Volt, ISP
AT89S4051 = 20 pin 4K flash memory, 256 byte RAM, 24 MHz xtal, Vcc=2 .7-5.5 Volt, ISP

Use regular Atmel AT89 series Flash Programmer
Vcc=2.7 Volt mean can directly connect AT89x051 to cellphone RX/TX

Atmel 8051 Architecture Product Parametric Table
 

    H

    Help

    Points: 2
    Helpful Answer Positive Rating
Least pin 8052 uC

NXP has LPC901/902/903/906/907/908, all are 8-pin. With the internal oscillator you can use up to 6 I/O pins.
For programming, you can use the MCB900 from Keil and an adapter that you can order @ www.lpctools.com
Software that comes with the MCB900 is good for 4k code size. The devices can store up to 1k code and 128 bytes SRAM.

Robert
 

    H

    Help

    Points: 2
    Helpful Answer Positive Rating
Re: Least pin 8052 uC

you may use ATtiny15 or attiny13
 

Re: Least pin 8052 uC

yousafzai said:
you may use ATtiny15 or attiny13
Click to expand...
TINY series is from AVR family, not 8051/52.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top