Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Allegro - Error after archiving

Status
Not open for further replies.
R

renato

Member level 1
Member level 1
Joined
Jul 16, 2002
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Brazil
Activity points
314
what is error 302 in allegro

Hello all,

I received a package of files that was archived in Allegro PCB Studio 15.51.

When I'd tried to link HDL and BRD file I got a lot of errors. To solve some errors, I open PCB file and export libs, associate simulation models and export logic w/ constraints.

I could import it to Concept HDL. But when I export again to Allegro PCB there were lot of errors like this:

#01 ERROR(302) Device library error detected.

Problems with the name of device '74LVC00A_XX-1111110000-VCC3=V_BATT': 'name too long'.

Device '74LVC00A_XX-1111110000-VCC3=V_B' has library errors. Unable to transfer to Allegro.


Does anyone see the same error ? Any tip to solve it ?

Thanks a lot.
 

allegro_long_package_name

Pls shorten the name of the device and try again
 

f you want Allegro to accept longer names
(up to 255 characters), you can do so by setting the following environment variable
in your env file.

set allegro_long_package_name

Good luck!!!
Raj.
 

    R

    renato

    Points: 2
    Helpful Answer Positive Rating
Thanks nagaup3 ... very usefull answer and tip. You helped a lot.

alex_epds ... go to a dummies forum or go joking in another place, please.


Regards,

Renato
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top