Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help on ULN2003A, ULN2803 and LED matrix

Status
Not open for further replies.
RollingEEE

RollingEEE

Full Member level 3
Full Member level 3
Joined
Mar 25, 2006
Messages
165
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,298
Location
Bangladesh
Activity points
2,406
uln2803 led

I want to drive an 8 x 8 LED matrix display with the help of 1-2 ULN2003A, 1 ULN2803 IC. I can do the programming microcontroller and use 2 8 pin ports. How do I connect the matrix and the buffers?
 

uln2803 led matrix

i would suggest ULN2803, coz it contains 8 current drivers so overall u'll need 2 uln to for this. Most of the 8x8 LED arrays will have 16 pins( 8 anode connection and 8 cathode connection) by giving proper signal u can glow a particular LED.
Buffer must be placed between ULN and controller in order to protect the controller. By giving corresponding signal to ULN it will make its output High or Low, through which u can make the LED glow.

Any more clarification mail me.
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top