Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can I replace BF197 with BF199 transistor in this VHF amplifier?

Status
Not open for further replies.
Re: VHF amplifier

Hi,

Yes, you can use BF199 instead of BF197 transistor. It will also amplify about the same around 100MHZ in that circuit your link shows because its unity gain transit frequency is around 400-500MHz.
 

    O

    oasis4355

    Points: 2
    Helpful Answer Positive Rating
Re: VHF amplifier

Just another question,

When i'm dealing with VHF, the only parameter that i need to consider in the transistor is the unity gain transit frequency? or there's other parameter in different transistor that i need to consider as well.

Alex
 

Re: VHF amplifier

Other parameters are: Gain, Noise Figure, Linearity, Stability, Supply voltage, Current consumption.
 

VHF amplifier

I think freeacale's LDmos transistors are good chioce for the VHF PA design.
I have completed many PAs wroking from 30mhz to 500mhz, All used freeacale's transistors.
Btw, Point 9's transistor for VHF is a another good chioce.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top