Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What's the best method for biasing BJT/MOS?

Status
Not open for further replies.
R

rabel126

Member level 3
Member level 3
Joined
Feb 8, 2006
Messages
57
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,288
Location
pakistan
Activity points
1,607
there r four methods of biasing a BJT/MOS wich is the best and why?
 

Re: biasing BJT/MOS

rabel126 said:
there r four methods of biasing a BJT/MOS wich is the best and why?
Click to expand...
Voltage divider bias is the best in terms of stability as it is independent of device parameter changes and also not affected by variation in temperature.
 

biasing BJT/MOS

Depending on the application we use different biasing techniques.but in most application voltage divider technique is used.
 
Re: biasing BJT/MOS

Voltage divider biasing method is the better among them because the q point is stable in this techinique of biasing.....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top