Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why are we dividing the clock frequency by two in microprocessors?

Status
Not open for further replies.

toram16

Junior Member level 2
Junior Member level 2
Joined
Dec 19, 2006
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
banglore
Activity points
1,423
hi friends this site is very useful for me,,,,,,,,,,,,

in case of microprocessors generally dividing the clock frquency by two wwhy?
examle in 8085 we need only 3 Mhz clock but we r using a oscillator of 6 Mhz then dividing why?
 

Re: abt microprocessor

toram16 said:
hi friends this site is very useful for me,,,,,,,,,,,,

in case of microprocessors generally dividing the clock frquency by two wwhy?
examle in 8085 we need only 3 Mhz clock but we r using a oscillator of 6 Mhz then dividing why?

becasue duration for execut in each operation is not be equal. some operation need two clock and some operation need one clock so when one instrution was execut there are alot of operation execut in parallel. that's why the operation that need only one clock must wait the operation that need two clock. that's why the internal clock of microprocessor must to divide by two.
 

Re: abt microprocessor

The internal workings of the ‘85 require clock with a 50% duty cycle, and division by 2 ensures that the clock signal has exactly 50% duty cycle (internally it is nonoverlapping two phase) ..

Regards,
IanP
 

    toram16

    Points: 2
    Helpful Answer Positive Rating
Re: abt microprocessor

bcoz clk frequency is half of crystal frequency
 

Re: abt microprocessor

hi all

its easy

that as known
some of it need two clock and others need one
for that some times you find that when you but an value it devided into 2

or less

try to use the double value
may it work

try and say hi ....
:idea::D
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top