Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Voltage elevating ICs

Status
Not open for further replies.

gdaporta

Member level 5
Member level 5
Joined
Apr 4, 2006
Messages
86
Helped
12
Reputation
24
Reaction score
1
Trophy points
1,288
Location
Argentina
Activity points
1,944
Hello everybody again:

I'm trying to make a voltage elevator. I have a 13v power supply from my battery car . I need to elevate this voltage to 35v and obtain at least 300mA from it.
Some friend told me about ones IC that elevate voltage but I search in some ic manufacturers page and I don't found anything.

Do you know that IC's?

or

Do you know how can I do it? (If it's pssible)

Thank's

By,

GuillerMo (AR)
 

Re: Voltage elevator ???

The LM2577-adj is a good candidate for this job ..

**broken link removed**

Regards,
IanP
Code:
                        o Vin
                        |
                  Cin   |       L          D            Vout
+ - NC          *--|(---*-----UUUUUU----*-|>S---*-------o
* - Conn        |       |               |       |       |
                |       |               |       /R1     | + Cout
                |     /-5---------------4-\     \       *-|(--*
                |     |                   |     /             |
                |     |    LM2577-ADJ     |     |             =
        *-------+-----1    8 pin DIP      2-----*            gnd
        |       |     |                   |     |
      Rc/       |     |                   |     /R2
        \       |     \---------3---------/     \
        /       |               |               /
        |       |               |               |
        *--|(---*---------------*---------------*
           Cc                   |
                                =
                               gnd
 

    gdaporta

    Points: 2
    Helpful Answer Positive Rating
Re: Voltage elevator ???

IanP said:
The LM2577-adj is a good candidate for this job ..

**broken link removed**

Regards,
IanP
Code:
                        o Vin
                        |
                  Cin   |       L          D            Vout
+ - NC          *--|(---*-----UUUUUU----*-|>S---*-------o
* - Conn        |       |               |       |       |
                |       |               |       /R1     | + Cout
                |     /-5---------------4-\     \       *-|(--*
                |     |                   |     /             |
                |     |    LM2577-ADJ     |     |             =
        *-------+-----1    8 pin DIP      2-----*            gnd
        |       |     |                   |     |
      Rc/       |     |                   |     /R2
        \       |     \---------3---------/     \
        /       |               |               /
        |       |               |               |
        *--|(---*---------------*---------------*
           Cc                   |
                                =
                               gnd

Thanks. I take a look and it's ok. I asqued National for some samples.

Thank you again.

By,

GuillerMo (AR)
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top