Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Which is this smart card?

Status
Not open for further replies.

UroBoros

Advanced Member level 2
Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
Hai

I have a type of smart cards available locally.

It has got 6 pins (Just like the atmel card with 8 pins in IIC mode)

but the vendor is not in a position to give me the manufacture or datasheet of the card.All he says in a 1 MB card.That is all.

can anybody help me to obtain the datasheet of this card. Nothing written or marked on the card .Just 6 pins with usual memmory card size.Fits directly in my FCI connector for 8 pin atmel card.

available locally .but to use I should get the info .please

urgent

picstudent
 

what is the card usage there ? for example if it is used for payphones , you can guess what it is or .... , otherwise the only way is testing it with some known cards like pic or atmel MCUs inside the dard ... ,
however if you knew it is payphone card , you can not acess theis datasheets easily , because most of these cards have security usage and getting datasheets need to sign NDA ( non-disclosure agreement ) with manufactorer ...
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Hai
Thanks for the info.

it seems difficult to locate .morover from the information i gathered it seems to me that these 6 pin cards are meant for SPI or rather three wire interface.What i want is a two wire IIC interface card. So it seems useless for me any way.

Any body help me to locate Atmel, 128 byte, IIC, two wire interface, 8 pin card in INDIA?

Thanks
picstudent
 

that is not complete datasheet , you can not work with the card with those information , you should sign NDA as i said to get the complete datasheet ...

Regards.
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top