Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why is it necessary to use pads for ICs when mounting them on Vero board ?

Status
Not open for further replies.
A

agent_009

Member level 2
Member level 2
Joined
Dec 17, 2006
Messages
47
Helped
10
Reputation
20
Reaction score
3
Trophy points
1,288
Activity points
1,563
Why is it necessary to use pads for IC's when mounting them on Vero board ? I have heard they get short circuited. Is that really the reason? If so why do they get short circuited ?

Thanx in advance
 

Pads of IC's

The pad in IC is for bonding the circuit's terminal to outside world. I can not understand what you are saying about the short circuit, please elaborate that
 

    A

    agent_009

    Points: 2
    Helpful Answer Positive Rating
Re: Pads of IC's

what i actually mean is that on a vero board why is it necessary to use pad? why it can not be used like a resistor or a capacitor ?
 

Re: Pads of IC's

There are 2 main reasons.


1. Using a pad alowes the IC to be replaced latter in case of damage.

2. If u place the chip directly on the board u may over heat it when soldering.

pads ovoid this
 

    A

    agent_009

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top