Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ATX Power Supply Tester

Status
Not open for further replies.
T

togarha

Member level 4
Member level 4
Joined
Sep 4, 2006
Messages
69
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,755
Hi!

Do yo know any schematic for an ATX Power Supply Tester? To test all voltages (may be test it when it gets so current it continues working? )

Thanks in advance...

Regards,
 

Thanks a lot,

And a cheaper and simple one?

Regards,
 

hi

i ned schematic atx power tester

tanks
 

Will this work with any ATX power supply?
Thank you.
 

I have always just used a 1 or 2 watt 12volt bulb, and a 5 watt 6 volt bulb. I agree that this doesn't stress the power supply, but at least you can see that it is working (and you can measure the voltage across the bulbs).

word of warning, don't run switch-mode power supplies without a load connected.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top