Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ISE 8.2 and tbw files

Status
Not open for further replies.
buenos

buenos

Advanced Member level 3
Advanced Member level 3
Joined
Oct 24, 2005
Messages
962
Helped
40
Reputation
82
Reaction score
24
Trophy points
1,298
Location
Florida, USA
Activity points
9,143
in the older ISE, the tbw files were wisible in the project-files-tree.
now it isnt.
I can add a new tbw, and I can edit it, but I can not open an oldert tbw file to edit, and to simulate with modelsin-XE. If I want to add the old tbw file to project, it says: its already in the project.
I made a project in ISE7, but I want to continue it in ISE8.
is it a bug, or a neww "good" feature?

how can I simulate with modelsim?
how can I edit the tbw graphically?
 

i don't know how it was in ise 7, but in ise 8 you have to change the "Sources For:" drop down field to "Behavioral Simulation" or "Post-Route Simulation" to see your waveform sources.

Once you generated the .tbw file you can't change the signal clock assignment easily, which is very limiting IMO.

HTH
dsp_
 

    buenos

    buenos

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top