Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

small pcb interconnect options help

Status
Not open for further replies.
F

fvnktion

Junior Member level 1
Junior Member level 1
Joined
Jan 20, 2006
Messages
18
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,465
Hello,

Im currently trying to design a pcb that is roughly .500x.500 " in size and i need to interconnect via a header or some other form. I can not find any breakaway headers under 2mm in pitch. I would like to use something more on the scale of a .050 " or 1mm pitch. It would seem that there is a reason that they are not manufactured in these sizes??

Does anyone have any recommendations on getting a maximum number of i/o interconnects to a board this size?? An edge connector, cable, header??

Any recommendations would be great!

Thanks
 

0.5mm header usually comes in the form of smt parts and uses FPC (flexible printed cct) cable for the interconnection. You can find these headers in use inside cellphones & pdas etc.
 

    F

    fvnktion

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top