Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RTL coding guidelines ?

Status
Not open for further replies.
V

viju

Member level 4
Member level 4
Joined
Nov 26, 2006
Messages
71
Helped
16
Reputation
32
Reaction score
9
Trophy points
1,288
Location
Bangalore
Activity points
1,815
Hi , I am new in EDA.
Can any one tell me what are the RTL coding guidelines for the sucessful synthesis ? Why they are important? Advantages ?

Thanks,
VJ
 

Hi VJ,

RTL coding guide lines needs to be followe to avoid the the simulation and synthesis mismatch. And also for the desired synthesis results.

You search on the web, you will get many documents on it.
I would suggest you to refere the papers published by Cliff Cumming on verilog coding.

Hope this helps you and makes you doubt clear...

Regards,
Tarang
 

    V

    viju

    Points: 2
    Helpful Answer Positive Rating
viju said:
Hi , I am new in EDA.
Can any one tell me what are the RTL coding guidelines for the sucessful synthesis ? Why they are important? Advantages ?

Thanks,
VJ
Click to expand...
An excellent reference to RTL coding guidelines is the popular Reuse Methodology Manual

**broken link removed**

Almost all Lint tools come with rulesets that will check your RTL for this compliance.

Also, books on HDL synthesis will help you understand the rationale, such as HDL Synthesis Primer by Bhasker.

As an extension of this, in Verification there is VMM - Verification Methodology Manual, though it is much much more than just coding guidelines. See www.noveldv.com or www.vmm-sv.org for more.

HTH
Ajeetha, CVC
www.noveldv.com
 

good designs are done with sysnthesis keeping in mind and working according to frequencies for good sta and sritical paths
 

viju said:
Hi , I am new in EDA.
Can any one tell me what are the RTL coding guidelines for the sucessful synthesis ? Why they are important? Advantages ?

Thanks,
VJ
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top