Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

speaker and mic project

Status
Not open for further replies.
H

hong

Newbie level 3
Newbie level 3
Joined
Nov 9, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
The below is just a simple block diagram, I want know if there is any other solution, want to have simple features for speaker and mic only.
This integration solution is being connected using LAN to the server, another alternative is connected through Power Line.

Do you all have any suggestion on how to develop this application? Any recommendation welcome.

Millions thanks!
 

if it is a prototype or a course project, you can start with some evaluation board/kit, then you do not need to make your own hardware and basic drivers. try the whole board as one component/or developing platform. you may start from IPC/ARM.
 
Please to take a look at
Maxim-Dallas App Note 3266
Using the DS80C400/TINIm400 for Remote Audio
**broken link removed**
 

Thank you! I also see the Maxim's PowerLine Networking ICs.
How do I develop the block diagram of using PowerLine Networking ICs to speaker and mic? Do I need transmitter and reciever for the speaker and mic?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top